Thinking About Green Engineer Training – An A-Z

In a nutshell, ‘Green Energy’ utilises natural resources such as sunlight, wind, tides and geothermal heat to provide our daily energy requirement. They are considered ‘Green’ because they are environmentally friendly. It is easy to think that we may be travelling back in time when we think of items such as wind power and windmills. However, it is the result of eco-efficient and planet friendly options that this process is maintained.

In the home environment, one can see examples such as Solar Thermal and Solar Water Heating Collectors. Moving on from this there are the Photovoltaic Panels (PV’s) which can generate electricity from your roof. Equally important is that of Biomass Energy – which includes Stoves, Fuel, Pellets and Boilers burning Wood. We now also have Ground Source Heat Pumps – which draw out the heat left by the Sun. Not all ‘Green Energy’ is new – by considering Wind Power and Hydropower we are looking at some of the oldest forms of energy production.

Solar Energy Systems: Often called Solar Energy, this is fact based on two types of solar panels each using different ideas to get their results. Initially, there is the process of obtaining hot water from the Sun via Solar Water Heating Collectors. Additionally, there is the method of converting solar radiation into electricity known as Photovoltaic – or simply Solar Electrical panels. Solar Panels themselves need to be away from all light blocks, and should be on south facing roofs at angles of 30 degrees from the horizontal plane.

For the UK, this is often considered the most popular form of ‘Green Energy’. Solar Water heating systems can meet the need for more than half of all hot water needs in the domestic market. Getting a professional fitting will cost around 2-5k, however, doing the job yourself could make it as low as 500 to 1500 pounds in total.

Biomass Energy: This term encompasses all forms of natural products – such as plant and animal material. Considering its ability to produce energy in the form of heat and electricity, this type of energy is extremely flexible. Furthermore, within the European Markets, the UK is one of the central producers of Biomass fuels. One of the main factors of this style of energy is the result without the impact on C02. To that end, many wood crops come from sustainable sources (as one tree is felled, another is planted in its place; thus the new tree absorbs the CO2 produced during the heating process.)

‘Energy Crops’ trees such as Willow and Poplar play a major part in the process – under the banner of Short Rotation Coppice (SRC). Perennial grasses also produce a high yield of dry matter. Within this process also sits the lesser known Agricultural and Municipal Wastes. Agricultural Waste is commonly formed as a by-product of traditional agricultural work. Another biomass source is that of municipal waste – and this comes from recycled wood or food.

Systems Based On Geo-Thermal Energy: By naturally heating the Earth, the Sun has the potential to generate both warm water and electricity. Using the ground temperature of around 12 degrees in the UK – we can both heat and cool buildings. These heat pumps do need some power to operate; but for every one unit of energy they use, they generate four units of energy in return. This system can go even further – if energy efficient items such as wind turbines or solar electrical panels are used.

Systems Based On Wind Energy: When you consider the milling of grain and pumping of water, it is easy to see how long wind energy has been with us. Whether to your home or to a local grid, when the energy has been generated it must be delivered to a point of usage – and cannot be stored. To be fair, the UK has the highest level of wind generation within Europe. It is interesting to note that whilst we can produce 10 percent of our entire power requirement from wind power, at present we only produce 1 percent. Rather than electricity production running at 2-10 p per kWh, it could be run at 2p per kWh. Therefore, recovery of cost takes approximately 6-9 months overall.

Then there is Hydropower – something within Europe that the UK excels in. Although new in its approach, the act of harnessing energy from water has been going on for a long time. In total, this could produce something like 2 percent of all electricity required in the UK.

By using a turbine, a Hydropower system can transfer the kinetic energy of moving water into another form. Turbines use either a water drop (e.g. through a dam) or by a natural ‘run of the river’ – thereby having no water storage reservoir. ‘Micro-Hydro’ however utilises old outdated sluices and dams. Although a lesser known form of electricity output, this process could supply 200mW of UK demand. The expected cost of installing a system such as this would be between 200 pounds and 3k per kW of output.

Because of the energy need of the Western World, we are now seeing a rapid rise in ‘Green Energy’. The UK is very well placed to provide most of the schemes set out above, and the UK domestic market again is one of the key beneficiaries of this technology.

Electricians and Plumbers in particular are expected to provide the main thrust of domestic installation expertise. With ‘Green Energy’ rising up the political agenda in Europe, a range of financial aids and grants are becoming available. This is a new industry – but getting the right certification can only improve job security and opportunities for the future. Electrical or plumbing training that incorporates green technology could be very useful for the future.

(C) 2009 Scott Edwards. Visit electricalcoursegb.co.uk/RenewableEnergyCertification.html or Green Engineer Certification.

categories: computer,education,self improvement,advice,web,career,home,work,money,technology,software,games,hobbies,shop